Front Seat Backrest: Installation

WARNING: This page is about a different car, the 2018 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

All seats

To install, reverse the removal procedure
1. Install retainer and hand tighten clockwise 4 turns.
2. Install retainer and hand tighten clockwise 4 turns.
3. Install retainer and hand tighten clockwise 4 turns.
4. Install retainer and hand tighten clockwise 4 turns.
Courtesy of FORD MOTOR COMPANY
1. Tighten the bolt.
  Torque
  
  : 33 lb.ft (45 Nm)
2. Tighten the bolt.
  Torque
  
  : 33 lb.ft (45 Nm)
3. Tighten the bolt.
  Torque
  
  : 33 lb.ft (45 Nm)
4. Tighten the bolt.
  Torque
  
  : 33 lb.ft (45 Nm)
Courtesy of FORD MOTOR COMPANY
NOTE: Before installing the height adjust handle, check that the cap is positioned correctly.

Install the height adjust handle.

Courtesy of FORD MOTOR COMPANY
Install the front seat. Refer to: Front Seat .
Driver seat
NOTE: This step is only necessary when installing a new seat backrest frame with memory seat option.

Operate the seat backrest in both directions through the full range of travel to set soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.