LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Escape S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Passive Anti-Theft System (Pats) - Vehicles With: Keyless Entry And Push Button Start >> Description And Operation >> Passive Anti-Theft System (PATS) - System Operation and Component Description >> System Operation >> PATS Parameter Identifications (PIDs)

PATS Parameter Identifications (PIDs)

In conjunction with Diagnostic Trouble Codes (DTCs), the PATS Parameter Identification (PIDs) are a useful tool when diagnosing the PATS concerns.

BCM PID Chart 

Acronym Name Description
PCM_ID PCM ID Status Stored Indicates if there is a PCM identification currently stored in the BCM. Must read stored for the vehicle to start.
PCM_VERIFY PCM Verify OK Indicates if the module identification check between the BCM and the PCM passes. Must read yes for the vehicle to start.
START_ENABLD Vehicle Enable Status Indicates if the PATS allows the vehicle to start. Must read enabled for the vehicle to start.

RFA Module PID Chart 

NOTE: The RFA module PATS Parameter Identifications (PIDs) do not actively display their current state. They only display the correct state when the ignition is turned to the ON mode.
Acronym Name Description
MIN_KEYS Minimum number of keys required Minimum number of programmed keys required. This PID always reads 2.
scientia non olet · About LEMON Manuals