LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Escape S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches And Entry Systems >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Vehicles With: One-Touch Open and Close Front Windows >> Pinpoint Tests >> Pinpoint Test AF : U3003:62 >> Notes

Pinpoint Test AF : U3003:62: Notes

Refer to REMOTE KEYLESS ENTRY AND ALARM for schematic and connector information.

Normal Operation and Fault Conditions 

The DDM/ PDM are supplied voltage at all times. The module monitors this voltage and also receives a battery voltage message from the BCM. the voltage to the DDM/ PDM drops low enough, all door module functions are inoperative.

DDM/ PDM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U3003:62 Battery Voltage: Signal Compare Failure Sets when the DDM/ PDM detects the voltage amount from the supply circuit is significantly lower than what is reported from the BCM.

Possible Causes 

scientia non olet · About LEMON Manuals