LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Edge Titanium, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls System - 3.5L DURATEC (212KW/278PS) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation

Powertrain Control Module (PCM): Installation

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: This step is only necessary when installing a new component.

    Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Configuration - System Operation and Component Description . Use the General Equipment: Ford Diagnostic Equipment

  1. 3.

    NOTE: This step is only necessary when installing a new component.

    Reprogram the Passive Anti-Theft System (PATS). Refer to: Anti-Theft Security Access .

  1. 4.

    Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.
scientia non olet · About LEMON Manuals