Adaptive Steering System Component Testing

• DTC Symptom Index
  • DTC Index
    • SECM - Steering Effort Control Module
      • DTC B135C: Heater Element
      • DTC B137F: Steering Wheel Left Switch Pack
      • DTC B1380: Steering Wheel Right Switch Pack
      • DTC C100B: Motor Drive Current
        • Action
      • DTC C100C: Steering Tracking
      • DTC C1039: Active Front Steering (AFS) Lock: Emergency Position Not Reachable
      • DTC C1B00: Steering Angle Sensor
      • DTC C2003: Steering Wheel Switch Left Module
        • Action
      • DTC C200D: Motor Rotation Angle Sensor
      • DTC U0001: High Speed CAN Communication Bus
        • Action
      • DTC U0100: Lost Communication With ECM/PCM "A"
        • Action
      • DTC U0121: Lost Communication With Anti-Lock Brake System (ABS) Control Module
        • Action
      • DTC U0126: Lost Communication With Steering Angle Sensor Module
        • Action
      • DTC U0131: Lost Communication With Power Steering Control Module
        • Action
      • DTC U0146: Lost Communication With Gateway "A"
        • Action
      • DTC U0151: Lost Communication With Restraints Control Module
        • Action
      • DTC U0401: Invalid Data Received from ECM/PCM "A"
      • DTC U0415: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module
      • DTC U0420: Invalid Data Received From Power Steering Control Module
        • Action
      • DTC U0428: Invalid Data Received From Steering Angle Sensor Module
        • Action
      • DTC U0452: Invalid Data Received From Restraints Control Module
        • Action
      • DTC U0557: Invalid Data Received From Front Controls Interface Module "A"
        • Action
      • DTC U1000: Solid State Driver Protection Active - Driver Disabled
        • Action
      • DTC U2000: Motor Temperature
      • DTC U2001: Reduced System Function
      • DTC U2002: Switch
      • DTC U2011: Motor
        • Action
      • DTC U2016: Control Module Main Software
        • Action
      • DTC U201A: Control Module Main Calibration Data
        • Action
      • DTC U2100: Initial Configuration Not Complete
        • Action
      • DTC U2101: Control Module Configuration Incompatible
        • Action
      • DTC U210A: Temperature Sensor
      • DTC U3000: Control Module
      • DTC U3003: Battery Voltage
  • Symptom Chart - Adaptive Steering
    • Notes
    • A Module Does Not Respond To The Diagnostic Scan Tool.
    • The Red Adaptive Steering System Warning Indicator Is Always On
    • The Yellow Adaptive Steering System Warning Indicator Is Always On
    • The Yellow Adaptive Steering System Warning Indicator Flashes Once Per Second During Start Up
    • Message Center Displays Adaptive Steering Initialization
    • Message Center Displays Adaptive Steering Off Service Required
    • Message Center Displays Adaptive Steering Loss Do Not Drive
    • Click Noise With Or Without Steering Wheel Movement During Vehicle Startup Or Shutdown
    • Steering Wheel Is Off Center (Clearvision Is Outside Of Expected Parameters)
    • High Steering Effort
• Pinpoint Tests
  • Pinpoint Test A: SECM Low Voltage Concern
    • Notes
    • Normal Operation and Fault Conditions
    • Possible Causes
    • Visual Inspection and Diagnostic Pre-checks
  • Pinpoint Test B: SECM High Voltage Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test C: Lost Communication With PCM Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test D: Lost Communication With ABS Module Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test E: Lost Communication With SASM Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test F: Lost Communication with PSCM Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test G: Lost Communication with GWM Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test H: Lost Communication With RCM Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test I: SECM Motor Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test J: SECM Internal Fault Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test K: Steering Lock Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test L: SECM High Current Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test M: SECM Temperature Concern
    • Normal Operation and Fault Conditions
    • Possible Causes
  • Pinpoint Test N: SECM Configuration Concern
    • Normal Operation and Fault Conditions
    • Possible Causes