LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Edge SE, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console >> Removal And Installation >> Instrument Panel >> Installation

Instrument Panel: Installation

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: Only use the specified material to lubricate the seals.

    Lubricate and install new O-ring seals.

    Material: Motorcraft® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B)

  1. 3.

    Fill and bleed the cooling system. Refer to filling and bleeding without a vacuum cooling system filler. Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING - 2.0L EcoBoost (184kW/250PS) - MI4, Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING - 2.7L EcoBoost (238kW/324PS) or Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING - 2.0L EcoBoost (184kW/250PS) - MI4.

  1. 4.

    NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the EPB module. Perform the following step to restore the EPB system and clear the EPB module DTC.

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.

scientia non olet · About LEMON Manuals