Front Seat: Installation

1.

To install, reverse the removal procedure.

2.

Install the front seat bolts in the following sequence.
1. 1.
  
  Install the front inboard bolt.
  Torque: 35 lb.ft (47 Nm)
1. 2.
  
  Install the front outboard bolt.
  Torque: 35 lb.ft (47 Nm)
1. 3.
  
  Install the rear inboard bolt.
  Torque: 35 lb.ft (47 Nm)
1. 4.
  
  Install the rear outboard bolt.
  Torque: 35 lb.ft (47 Nm)

GFD17812

Courtesy of FORD MOTOR COMPANY

3.

Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .