LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Edge SE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Removal And Installation >> Radio Transceiver Module (RTM) >> Removal

Radio Transceiver Module (RTM): Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    NOTE: If installing a new module, it is necessary to upload the module configuration information to the diagnostic scan tool prior to removing the module. This information must be downloaded into the new module after installation.

    Carry out the PMI procedure for the RTM.

  1. 2.

    Lower the headliner. Refer to: Headliner - Lowering .

  1. 3.

    1. 1.

      Disconnect the electrical connectors.

    1. 2.

      Release the tabs and remove the RTM.
GFD17518Courtesy of FORD MOTOR COMPANY