Crankshaft End Play
Special Tool(s)
 Courtesy of FORD MOTOR COMPANY
|
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent |
NOTE:
Refer to the appropriate Engine article for the specification.
- 1.
Install the Dial Indicator Gauge with Holding Fixture.
- 2.
Position the crankshaft to the rear of the cylinder block.
- 3.
Zero the Dial Indicator Gauge.
- 4.
Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
 Courtesy of FORD MOTOR COMPANY
|