LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Mustang GT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Electronic Engine Controls System - 2.3L ECOBOOST (231KW/314PS)) >> Removal And Installation >> Engine Mount Control Solenoid >> Removal

Engine Mount Control Solenoid: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    Disconnect the electrical, and the vacuum hose connectors. Remove the retainer and the engine mount control solenoid.

    Torque: 97 lb.in (11 Nm)

GFD130976Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals