Removal And Installation

WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles without navigation system

1.

Remove the HVAC module. For additional information, refer to Heating Ventilation Air Conditioning (HVAC) Module .

2.

Remove the 4 Audio Front Control Module (ACM) screws and position the ACM away from the center register trim panel.

GFD89274

Courtesy of FORD MOTOR COMPANY

Vehicles with navigation system

3.

Remove the RH instrument panel finish moulding.

All vehicles

4.

Remove the 4 instrument panel finish panel screws and remove the panel.

5.

Remove the 5 center instrument panel finish panel screws and the finish panel.

6.

Detach the in-vehicle temperature sensor from the instrument panel.

7.

Disconnect the in-vehicle temperature sensor aspirator hose and electrical connector.

8.

Remove the in-vehicle temperature sensor.

9.

To install, reverse the removal procedure.