LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Energi Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Clutch System) >> Clutch Switch >> Repair procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch switch.
  2. Push the clutch switch in the direction of the arrow to make sure that continuity is cut off.
    Fig 1: Checking Continuity Between Clutch Switch Connector Terminal 1 And Chassis Ground
    G09886035Courtesy of HYUNDAI MOTOR AMERICA

    NOTICE 

    Condition Clutch Pedal pressed Clutch Pedal Released
    Switch Operation ON (below 1.0Ω) OFF (Infinite Ω)