LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Energi Titanium >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts & Descriptions (Hybrid) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P0E59 - Dc/Dc Converter Temperature Sensor C Circuit Range/Performance

P0E59 - Dc/Dc Converter Temperature Sensor C Circuit Range/Performance

DTC DESCRIPTION P0E59 - DC/DC CONVERTER TEMPERATURE SENSOR C CIRCUIT RANGE/PERFORMANCE

Description:  This DTC sets when a variable voltage controller inductor temperature sensor is out of range or indicates a temperature greater than a calibrated threshold.
Possible Causes: 
  • Inverter concern
  • Variable voltage controller concern
  • Variable voltage controller inductor temperature sensor concern
Diagnostic Aids:  Clear the SOBDMC DTCs. Cold soak the vehicle for 6 hours. Repeat the self-test. If the DTC is retrieved again, install a new TCM. Refer to the Service Information, Automatic Transmission. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the TRID Block for a Replacement TCM.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.