LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Flex SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L Ti-VCT >> In-Vehicle Repair >> Engine Mount >> Removal

Engine Mount: Removal

  1. 1.

    With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting .

  1. 2.

    If equipped, release the 4 retainers and remove the underbody shield.
GFD56607Courtesy of FORD MOTOR COMPANY

  1. 3.

    NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan.

    Position a floor jack with a block of wood under the front of the oil pan.

GFD56626Courtesy of FORD MOTOR COMPANY

  1. 4.

    Detach the A/C line retainer from the shock tower bracket.
GFD56701Courtesy of FORD MOTOR COMPANY

  1. 5.

    Using hose clamp pliers, pinch the lower degas bottle hose and remove the hose from the coolant inlet pipe.
GFD56620Courtesy of FORD MOTOR COMPANY

  1. 6.

    Remove the degas bottle. For additional information, refer to Engine Cooling .

  1. 7.

    Remove the 4 engine mount nuts.
GFD56627Courtesy of FORD MOTOR COMPANY

  1. 8.

    Remove the 3 bolts and the engine mount.
GFD56628Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals