LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Flex SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L Ti-VCT >> In-Vehicle Repair >> Engine Mount >> Installation

Engine Mount: Installation

  1. 1.

    Install the engine mount and the 3 bolts.
    • Tighten to 90 Nm (66 lb-ft).
GFD56628Courtesy of FORD MOTOR COMPANY

  1. 2.

    Install the 4 engine mount nuts.
    • Tighten to 63 Nm (46 lb-ft).
GFD56627Courtesy of FORD MOTOR COMPANY

  1. 3.

    Install the degas bottle. For additional information, refer to Engine Cooling .

  1. 4.

    Connect the coolant hose to the coolant inlet pipe.
    • Remove the hose clamp pliers.
GFD56640Courtesy of FORD MOTOR COMPANY

  1. 5.

    Attach the A/C line retainer to the shock tower bracket.
GFD56701Courtesy of FORD MOTOR COMPANY

  1. 6.

    If equipped, install the underbody shield and attach the 4 retainers.
GFD56607Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals