Side And Rear Vision System
- Description And Operation
- Blind Spot Information System - Component Location
- Blind Spot Information System - Overview
- Blind Spot Information System - System Operation and Component Description
- Notes
- Network Message Chart
- Blind Spot Information System (BLIS®)
- Circumstances that cause false alerts are:
- Circumstances that cause missed alerts are:
- Cross Traffic Alert (CTA) System
- Cross Traffic Alert (CTA) detection zones:
- Circumstances that may cause non-detection are:
- Exterior Mirror Indication
- Blind Spot Information System (BLIS®) and Cross Traffic Alert (CTA) Message Center Function
- Blocked Sensor
- SODL / SODR
- Diagnosis And Testing
- Blind Spot Information System
- DTC Chart(s)
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A : Blind Spot Information System (BLIS®) Is Inoperative Or Does Not Function Correctly
- Pinpoint Test B : The Cross Traffic Alert (CTA) System Is Inoperative Or Does Not Function Correctly
- Pinpoint Test C : An Exterior Mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) Led (Light Emitting Diode) Is Always On
- Pinpoint Test D : An Exterior Mirror Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) Led (Light Emitting Diode) Is Inoperative
- Pinpoint Test E : The SODR (Side Obstacle Detection Control Module RH) Does Not Respond To The Scan Tool Or Cannot Be Configured
- Pinpoint Test F : The IPC (Instrument Panel Cluster) Message Center Displays A Blocked Sensor Message
- Pinpoint Test G : The Blind Spot Information System (BLIS®) And Cross Traffic Alert (CTA) System Cannot Be Turned Off In The Message Center
- Pinpoint Test H : DTC (Diagnostic Trouble Code) U3000:44, 45, 46, 48, 49 Or 4A
- Pinpoint Test I : DTC (Diagnostic Trouble Code) U3003:62
- Pinpoint Test J : DTC (Diagnostic Trouble Code) U0037:88, U0040:00, U0041:00, U0043:00, U0044:00 Or U0045:00
- Pinpoint Test K : DTC (Diagnostic Trouble Code) U0155:01
- Blind Spot Information System
- Removal And Installation