Inspection and Verification

1.

Verify the customer concern by operating the vehicle to duplicate the condition.

2.

If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.

3.

Install new components if a transmission fluid leak is found in any of the transmission cooling components.

4.

If the cause is not visually evident, check for DTC. REFER to: Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 3.2L Duratorq-TDCi (148kW/200PS) - Puma . REFER to: Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 3.7L Duratec (199kW/270PS) . REFER to: Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 3.7L Duratec (199kW/270PS) .

5.

If the cause is not visually evident, verify the symptom and refer to the Symptom Chart below.