Hydraulic Control Unit (HCU): Installation

WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

1.

To install, reverse the removal procedure.

2.

NOTE: The following steps are necessary if a new HCU or ABS module was installed.
- Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
- Carry out the IVD initialization using the scan tool and following the diagnostic scan tool on-screen instructions.

3.

Bleed the brake system. Refer to: Brake System Pressure Bleeding .