Normal Operation and Fault Conditions
WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
The ABS module monitors various inputs and compares the values to what should be expected. If the values received are out of range or not what should be expected, the ABS module sets a DTC.
Possible Causes
- Network communication concern
- CCM
- AP1
- Ignition ON, engine OFF.
- Carry out the ABS self-test.
- Carry out the C-CM self-test.
- Are any DTCs besides C0072:xx present?
Yes No DIAGNOSE all other DTCs first. Go to AP2.
- AP2: RECHECK DTC C0072:XX
- Ignition OFF.
- Allow the vehicle to cool for 30 minutes.
- Ignition ON, engine OFF.
- Carry out the ABS self-test.
- Carry out the C-CM self-test.
- Is DTC C0072:xx still present?
Yes No INSTALL a new CCM. The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition.