LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Transit-350 HD Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Engine Controls - Pinpoint Tests (Diesel)) >> Pinpoint Tests RC: Exhaust Gas Temperature (EGT) Sensor >> Introduction

Pinpoint Tests RC: Exhaust Gas Temperature (EGT) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Ford Transit-350 HD, 2017 Ford Transit-350, 2017 Ford Transit-250, 2017 Ford Transit-150, and 2017 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: MANUAL REGENERATION OF THE DIESEL PARTICULATE FILTER CAUSES THE EXHAUST GAS TO GET VERY HOT QUICKLY. INITIATE A MANUAL REGENERATION ONLY WHEN THE VEHICLE IS ON THE GROUND WITH THE AREA AROUND THE TAILPIPE FREE OF PEOPLE, OBSTRUCTIONS, FOREIGN MATERIAL OR OTHER ITEMS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY.
NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following: