Erase All Keys and Key Programming
WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
Programming
NOTE:
IKT type of keys for non- PATS and PATS equipped vehicles look identical. On the OASIS tab, click on the Additional Information link and use the search function (Ctrl+F) to find IMMOBILIZER. Vehicles with "LESS ENG IMMOBILIZER THEFT SYS" are not equipped with a PATS. If not equipped with a PATS, refer to Handles, Locks, Latches And Entry Systems
for RKE Transmitter Programming.
NOTE:
At least 2 or 4 PATS keys (depending on the original minimum number of keys required) with the correct mechanical cut must be available to carry out this procedure.
NOTE:
This procedure erases all MyKey ® features on all keys programmed to the vehicle. All of the keys operate as normal (admin) keys with no restrictions.
- 2.
From the diagnostic scan tool, view the BCM Minimum number of keys required (MIN_KEYS_RQD) PID. Record the minimum number of keys required.
- 3.
From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the on-screen instructions to enter the PATS security access.
- 4.
From the diagnostic scan tool menu, select "Ignition Key Code Erase" and follow the on-screen instructions until the key erase procedure completes. The scan tool then instructs you to program the keys to complete the process.
- 5.
Turn the ignition lock cylinder to OFF and disconnect the diagnostic scan tool (the key does not need to be removed from the ignition lock cylinder at this time).