LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Transit Connect Titanium >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Symptom Chart

Symptom Chart

Symptom Chart: ABS and Stability Control 

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods

Symptom Chart 

Condition Possible Sources Actions
A module does not respond to the diagnostic scan tool Fuse
Wiring, terminals or connectors
ABS module concern
SCCM concern
REFER to: Communications Network
The brake warning indicator is always or never on Low brake fluid level
Brake fluid level sensor
Parking brake applied
Parking brake switch
IPC concern
ABS concern
RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). If there are no ABS module Diagnostic Trouble Codes (DTCs), DIAGNOSE the brake warning indicator. REFER to: Instrumentation, Message Center and Warning Chimes
The ABS warning indicator is always or never on IPC concern
ABS concern
SCCM concern
RETRIEVE and DIAGNOSE all ABS module and SCCM Diagnostic Trouble Codes (DTCs). If there are no ABS module or SCCM Diagnostic Trouble Codes (DTCs), DIAGNOSE the ABS warning indicator. REFER to: Instrumentation, Message Center and Warning Chimes
The traction control OFF indicator (sliding-car OFF icon) is always on IPC concern
ABS concern
SCCM concern
RETRIEVE and DIAGNOSE all ABS module and SCCM Diagnostic Trouble Codes (DTCs). If there are no ABS module or SCCM Diagnostic Trouble Codes (DTCs), DIAGNOSE the ABS warning indicator. REFER to: Instrumentation, Message Center and Warning Chimes
ABS false activation, ABS too sensitive, ABS activates on normal stop Front or rear suspension concern ELIMINATE the front or rear suspension as the cause of the problem. REFER to: Suspension System
RCM mounting CONFIRM the RCM is mounted correctly. REINSTALL as necessary. REFER to: Restraints Control Module (RCM)
Loose wheel speed sensor or excessive air gap INSPECT wheel speed sensor for looseness or excessive air gap. TIGHTEN or INSTALL new as necessary. REFER to: Front Wheel Speed Sensor  REFER to: Rear Wheel Speed Sensor 
Wheel speed sensor encoder damaged, rusted or contaminated with foreign material INSPECT the encoder for damage, rust and foreign material. CLEAN, REMOVE foreign material or INSTALL new as necessary. REFER to: Front Wheel Bearing REFER to: Wheel Bearing and Wheel Hub
Parking brake shoes out of adjustment (dragging) CHECK and if necessary, ADJUST the parking brake. REFER to: Parking Brake Cable Adjustment
The traction control system is inoperative or cannot be disabled - vehicles not equipped with a message center Refer to the Pinpoint Test GO to Pinpoint Test E 
The traction control system is inoperative or cannot be disabled - vehicles equipped with a message center Refer to the Pinpoint Test GO to Pinpoint Test Q