Cylinder Head: Disassembly
WARNING: This page is about a different variant/trim than selected.
All cylinder heads
NOTE:
If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations.
- 1.
Using the Valve Spring Compressors, remove the keys, retainer and spring.
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Remove and discard the valve stem seal.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Remove the valve from the cylinder head.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Repeat the above steps for each valve.
- 5.
Remove the timing chain guide pin.
 Courtesy of FORD MOTOR COMPANY
|
RH cylinder head
- 6.
Remove the timing chain tensioner arm pin.
 Courtesy of FORD MOTOR COMPANY
|
- 7.
Remove and discard the Cylinder Head Temperature (CHT) sensor.
 Courtesy of FORD MOTOR COMPANY
|