LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Special Service Police Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 464 (Side And Rear Vision System) >> Diagnosis And Testing >> Blind Spot Monitoring >> Pinpoint Tests >> Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured >> Notes

Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured: Notes

WARNING: This page is about a different car, the 2016 Ford Special Service Police Sedan and 2016 Ford Police Interceptor Sedan. However, it is still accessible from the selected car via links, so may be relevant.

Pinpoint Test E: The SOD-R Does Not Respond To The Scan Tool Or Cannot Be Configured 

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Refer to Vehicle Emergency Messaging System for schematic and connector information.

Normal Operation and Fault Conditions 

The SOD-R uses an address ground pin for configuration. The address ground is necessary so the BLIS ® or the CTA system can decipher between the SOD-R and the SOD-L during configuration. The SOD-R communicates over the MS-CAN.