Handles, Locks, Latches & Entry Systems: BCM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B10AB:00 | Remote Keyless Entry Synchronization: No Sub Type Information | GO to Pinpoint Test O |
| B10C7:01 | Interior Trunk Antenna: General Electrical Failure | GO to Pinpoint Test T |
| B11C6:01 | Passenger Door External Antenna: General Electrical Failure | GO to Pinpoint Test S |
| B11CA:01 | Driver Door External Antenna: General Electrical Failure | GO to Pinpoint Test S |
| B1218:00 | Transmitter Identification Code: No Sub Type Information | GO to Pinpoint Test O |
| B1219:11 | Interior Boot/Trunk Release Switch: Circuit Short To Ground | GO to Pinpoint Test N |
| B126A:01 | Drivers Door Interior Lock Switch: General Electrical Failure | GO to Pinpoint Test J |
| B1381:11 | Left Front Door Handle Proximity Sensor: Circuit Short To Ground | GO to Pinpoint Test S |
| B1381:15 | Left Front Door Handle Proximity Sensor: Circuit Short To Battery or Open | GO to Pinpoint Test S |
| B1381:29 | Left Front Door Handle Proximity Sensor: Signal Invalid | GO to Pinpoint Test S |
| B1382:11 | Right Front Door Handle Proximity Sensor: Circuit Short To Ground | GO to Pinpoint Test S |
| B1382:15 | Right Front Door Handle Proximity Sensor: Circuit Short To Battery or Open | GO to Pinpoint Test S |
| B1382:29 | Right Front Door Handle Proximity Sensor: Signal Invalid | GO to Pinpoint Test S |
| B1490:11 | Lock Indicator LED Status Output: Circuit Short To Ground | GO to Pinpoint Test L |
| B1490:15 | Lock Indicator LED Status Output: Circuit Short To Battery or Open | If the door lock indicator is inoperative, GO to Pinpoint Test L If the door lock indicator is always on, GO to Pinpoint Test M |
| C1017:11 | Boot/Trunk Primary Switch: Circuit Short To Ground | GO to Pinpoint Test N |
| U0258:87 | Lost Communication With Radio Transceiver: Missing Message | GO to Pinpoint Test V |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) . |