Powertrain Control Module (PCM): Removal

NOTE: Removal steps in this procedure may contain installation details.

1.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in GENERAL INFORMATION . Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions .

2.

NOTE: This step is only necessary when installing a new component.

Download the module information to the diagnostic tool using the PMI routine.

Use the General Equipment: Ford Diagnostic Equipment

3.

Remove the LHF fender splash shield. Refer to: FENDER SPLASH SHIELD .

4.

Remove the retainers and the PCM cover.

GFD62124

Courtesy of FORD MOTOR COMPANY

5.
- Disconnect the PCM electrical connectors.
- Remove the retainers and the PCM.

GFD62125

Courtesy of FORD MOTOR COMPANY