Front Door Window Control Switch: Installation

• 1.
  
  To install, reverse the removal procedure.

Vehicles With: One-Touch Up and Down Driver Window 

• 2.
  
  
  NOTE: The master window control switch and the LH window motor must be initialized whenever battery voltage has been removed from the driver window control switch for greater than 3 minutes (for example, the battery or the master window switch is disconnected) or if a new driver window control switch is installed.

  If the door is equipped with one touch up/down, carry out the power door window initialization. REFER to: Power Door Window Initialization - Vehicles With: One-Touch Open and Close Driver Window/One-Touch Open and Close Front Windows