LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Explorer Base, 2.0L Eng VIN 9 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Installation

Anti-Lock Brake System (ABS) Module: Installation

    NOTE: Visually inspect the ABS module terminals for damage before installation.

  1. 1.
    Install the ABS module and the 4 ABS module screws.
    • Tighten to 2 Nm (18 lb-in).

  1. 2.

    Install the HCU. Refer to Hydraulic Control Unit (HCU) .
scientia non olet · About LEMON Manuals