LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Expedition XL, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal And Installation

Removal And Installation

  1. 1.

    Remove the wheel and tire. For additional information, refer to Wheels and Tires .

  1. 2.

    Disconnect the wheel speed sensor electrical connector.

  1. 3.

    Remove the wheel speed sensor harness bolt and detach the retainers.
    • To install, tighten to 12 Nm (106 lb-in).
    NOTE: Do not allow the caliper to hang from the brake hose or damage to the hose can result.

  1. 4.
    Remove the 2 caliper anchor bolts and position the caliper, pads and anchor plate aside.
    • Support the caliper with mechanic's wire.
    • To install, tighten to 250 Nm (184 lb-ft).

  1. 5.

    Remove the brake disc.

  1. 6.

    Remove the front wheel speed sensor bolt and the sensor.
    • To install, tighten to 18 Nm (159 lb-in).

  1. 7.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals