Ignition Coil-On-Plug: Removal

1.

Remove the oil filler cap and remove the engine appearance cover. Install the oil filler cap.

Courtesy of FORD MOTOR COMPANY

NOTE: When removing or installing the fuel injection pump noise insulator, spreading the openings will reduce the risk of damage.

2.
Remove the fuel injection pump noise insulator.

Courtesy of FORD MOTOR COMPANY

3.

Disconnect the ignition coil-on-plug electrical connectors and the high-pressure fuel pump electrical connector.

Courtesy of FORD MOTOR COMPANY

NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.

4.
Remove the ignition coil-on-plug mounting bolts and remove the ignition coil-on-plugs.

Courtesy of FORD MOTOR COMPANY