LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Escape S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case) >> Removal And Installation >> Intermediate Shaft Bushing >> Installation

Intermediate Shaft Bushing: Installation

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    Clean the PTU input shaft.
GFD50481Courtesy of FORD MOTOR COMPANY

  1. 2.

    NOTE: The bushing can be easily damaged when using a driver that is too small. Use light force and monitor installation progress frequently to avoid bushing damage.

    Using general shop equipment, install the new intermediate shaft bushing until it is seated against the machined recess in the PTU input shaft.

GFD50482Courtesy of FORD MOTOR COMPANY

  1. 3.

    Install a new intermediate shaft seal. Refer to: Intermediate Shaft Seal .
scientia non olet · About LEMON Manuals