Charging System - General Information

• Description And Operation
  • Charging System - 1.6L EcoBoost (132kW/180PS) - Sigma - Overview
    • Overview
  • Charging System - 1.6L EcoBoost (132kW/180PS) - Sigma - System Operation and Component Description
    • System Operation
      • System Diagram
      • Network Message Chart
        • Module Network Input Messages - Body Control Module (BCM)
        • Module Network Input Messages - Instrument Panel Cluster (IPC)
        • Module Network Input Messages - Powertrain Control Module (PCM)
        • Charging System
        • Electrical Energy Management
        • Battery State of Charge
        • Engine Off Load Shed
        • Battery Charging
        • Jump Starting
        • Battery Replacement
    • Component Description
      • Generator
        • Notes
        • Battery Monitoring Sensor
      • Powertrain Control Module (PCM)
  • Charging System - 2.5L Duratec (125kW/170PS) - Overview
    • Overview
  • Charging System - 2.5L Duratec (125kW/170PS) - System Operation and Component Description
    • System Operation
      • System Diagram
      • Network Message Chart
        • Module Network Input Messages - Body Control Module (BCM)
        • Module Network Input Messages - Instrument Panel Cluster (IPC)
        • Module Network Input Messages - Powertrain Control Module (PCM)
        • Charging System
        • Engine Off Load Shed
        • Battery Charging
        • Jump Starting
        • Battery Replacement
    • Component Description
      • Generator
      • Powertrain Control Module (PCM)
• Diagnosis And Testing
  • Charging System - 1.6L EcoBoost (132kW/180PS) - Sigma
    • Inspection and Verification
    • DTC Charts
      • Notes
      • PCM DTC Chart
      • BCM DTC Chart
    • Symptom Chart(s)
      • Symptom Chart: Charging System
    • Pinpoint Tests
      • Pinpoint Test A: System Voltage High
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test A: System Voltage High
      • Pinpoint Test B: System Voltage Low Or Battery Is Discharged
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test B: System Voltage Low Or Battery Is Discharged
      • Pinpoint Test C: Generator Noise Or Mechanical Performance
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test C: Generator Noise Or Mechanical Performance
      • Pinpoint Test D: Radio Interference
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test D: Radio Interference
      • Pinpoint Test E: B11DB:83
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test E: B11DB:83
      • Pinpoint Test F: DTC U1007:00
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test F: DTC U1007:00
      • Pinpoint Test G: DTC U012D, U042E
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test G: DTC U012D, U042E
  • Charging System - 2.5L Duratec (125kW/170PS)
    • Inspection and Verification
    • DTC Charts
      • Notes
      • PCM DTC Chart
      • BCM DTC Chart
    • Symptom Chart(s)
      • Symptom Chart: Charging System
    • Pinpoint Tests
      • Pinpoint Test A: System Voltage High
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test A: System Voltage High
      • Pinpoint Test B: System Voltage Low Or Battery Is Discharged
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test B: System Voltage Low Or Battery Is Discharged
      • Pinpoint Test C: Generator Noise Or Mechanical Performance
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test C: Generator Noise Or Mechanical Performance
      • Pinpoint Test D: Radio Interference
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test D: Radio Interference
      • Pinpoint Test E: DTC U012D, U042E
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test E: DTC U012D, U042E