Anti-Lock Brake System (Abs) And Stability Control

• Description And Operation
  • Anti-Lock Brake System (ABS) and Stability Control - Component Location
  • Anti-Lock Brake System (ABS) and Stability Control - Overview
    • General
    • ABS/ESC (electronic stability control) module and hydraulic control unit (HCU)
    • Combined yaw rate sensor and lateral acceleration sensor/longitudinal acceleration sensor
    • Service instructions
  • Anti-Lock Brake System (ABS) and Stability Control - System Operation and Component Description
    • System Operation
      • The HCU features 3 operating modes
      • Principles of operation
    • Component Description
      • SCCM with integrated magneto-resistive steering angle sensor
      • ABS/ESC module and hydraulic control unit (HCU)
      • Hydraulic Control Unit (HCU)
      • ESC switch (location depending on vehicle equipment)
• Diagnosis And Testing
  • Anti-Lock Brake System (ABS) and Stability Control
    • Diagnostic Trouble Code (DTC) Charts
      • DTC Chart: ABS Module
    • DTC Chart: SCCM
    • Symptom Chart
      • Symptom Chart: ABS and Stability Control
    • Pinpoint Tests
      • Pinpoint Test A: U3003:16
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test A: U3003:16
      • Pinpoint Test B: Wheel Speed Sensor Erratic Signal Diagnostic Trouble Codes (DTCS)
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test B: Wheel Speed Sensor Erratic Signal Diagnostic Trouble Codes (DTCS)
      • Pinpoint Test C: C0040:64
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test C: C0040:64
      • Pinpoint Test D: U0140:00
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test D: U0140:00
      • Pinpoint Test E: The Traction Control System Is Inoperative Or Cannot Be Disabled
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test E: The Traction Control System Is Inoperative Or Cannot Be Disabled
      • Pinpoint Test F: U3003:17
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test F: U3003:17
      • Pinpoint Test G: Stability Control Sensor Signal Failure Diagnostic Trouble Codes (DTCS)
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test G: Stability Control Sensor Signal Failure Diagnostic Trouble Codes (DTCS)
      • Pinpoint Test H: C0020:01, C0020:1C, C0020:71
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test H: C0020:01, C0020:1C, C0020:71
      • Pinpoint Test I: Pcm (Powertrain Control Module) And TCM (Transmission Control Module) Communication Faults
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test I: Pcm (Powertrain Control Module) And TCM (Transmission Control Module) Communication Faults
      • Pinpoint Test J: U0126:00
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test J: U0126:00
      • Pinpoint Test K: U3003:62 - SCCM (Steering Column Control Module)
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test K: U3003:62 - SCCM (Steering Column Control Module)
      • Pinpoint Test L: SCCM (Steering Column Control Module) Signal Failure Diagnostic Trouble Codes (DTCS)
        • Notes
        • Possible Causes
        • Pinpoint Test L: SCCM (Steering Column Control Module) Signal Failure Diagnostic Trouble Codes (DTCS)
      • Pinpoint Test M: Wheel Speed Sensor Electrical Fault Diagnostic Trouble Codes (DTCS) - Front
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test M: Wheel Speed Sensor Electrical Fault Diagnostic Trouble Codes (DTCS) - Front
      • Pinpoint Test N: Wheel Speed Sensor Electrical Fault Diagnostic Trouble Codes (DTCS) - Rear
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test N: Wheel Speed Sensor Electrical Fault Diagnostic Trouble Codes (DTCS) - Rear
      • Pinpoint Test O: U3003:62 - Abs (Anti-Lock Brake System) Module
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Pinpoint Test O: U3003:62 - Abs (Anti-Lock Brake System) Module
      • Pinpoint Test P: U0300:00
        • Notes
        • Normal Operation and Fault Conditions
        • Pinpoint Test P: U0300:00
• Removal And Installation
  • Front Wheel Speed Sensor
    • Notes
    • Removal
    • Installation
  • Rear Wheel Speed Sensor
    • Notes
    • Removal
    • Installation
  • Steering Angle Sensor Module (SASM)
    • Notes
    • Removal
    • Installation
  • Hydraulic Control Unit (HCU)
    • Notes
    • Removal
    • Installation