LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Transit Connect Titanium, 1.6L Eng VIN X >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Cable >> Installation

Selector Lever Cable: Installation

  1. NOTICE: Gearshift cables must not be kinked or bent. 

    Attach a pull cord to the selector lever cable.

    Use the General Equipment: Draw Cord

    Use the General Equipment: Adhesive Tape

    G00553648
  2. To install, reverse the removal procedure.
  3. Adjust the selector lever cable. Refer to: Selector Lever Cable Adjustment .
scientia non olet · About LEMON Manuals