Possible Sources

Fuse
Wiring, terminals or connectors
Steering column control switch
Adjustable steering column tilt motor
Steering column assembly

SCCM

DTC	DTC Description	Fault Trigger Conditions
B1375:18	Steering Column Tilt Motor: Circuit Current Below Threshold	This DTC sets when the SCCM senses current flow to the adjustable steering column tilt motor is below a preset limit while the steering column control switch is activated. This may be caused by an open or high resistance in the adjustable steering column tilt motor circuits.
B1375:19	Steering Column Tilt Motor: Circuit Current Above Threshold	This DTC sets when the SCCM senses current flow to the adjustable steering column tilt motor is above a preset limit while the steering column control switch is activated. This may be caused by a short to ground in the adjustable steering column tilt motor circuits.
B1375:71	Steering Column Tilt Motor: Actuator Stuck	This DTC sets when the SCCM senses current flow to the adjustable steering column tilt motor is within a specific range but above a preset limit during self test.
B137E:18	Steering Column Telescope Motor: Current Below Threshold	This DTC sets when the SCCM senses current flow to the adjustable steering column telescope motor is below a preset limit while the steering column control switch is activated. This may be caused by an open or high resistance in the adjustable steering column telescope motor circuits.
B137E:19	Steering Column Telescope Motor: Current Above Threshold	This DTC sets when the SCCM senses current flow to the adjustable steering column telescope motor is above a preset limit while the steering column control switch is activated. This may be caused by a short to ground in the adjustable steering column telescope motor circuits.
B137E:71	Steering Column Telescope Motor: Actuator Stuck	This DTC sets when the SCCM senses current flow to the adjustable steering column telescope motor is within a specific range but above a preset limit during on-demand self test.