Section 132 (Climate Control System - General Information And Diagnostics)
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Climate Control System
- Notes
- Principles of Operation
- Inspection and Verification
- DTC Charts
- Symptom Chart - Climate Control Systems
- Symptom Chart - NVH
- Pinpoint Tests
- Pinpoint Test A: DTC P0532 or P0533
- Pinpoint Test B: DTC P0645
- Pinpoint Test C: DTCs C1B14:11 and C1B14:12
- Pinpoint Test D: DTCs B1A61:11 and B1A61:15
- Pinpoint Test E: DTCs B1A68:11 and B1A68:15
- Pinpoint Test F: DTCs B1A63:11 and B1A63:15 or DTCs B1A64:11 and B1A64:15
- Pinpoint Test G: DTCs B1B71:11 and B1B71:15
- Pinpoint Test H: DTCs U3003:16 and U3003:17
- Pinpoint Test I: Unable To Duplicate The Customers Concern and No DTCs Present
- Pinpoint Test J: The Air Inlet Door is Inoperative
- Pinpoint Test K: Incorrect/Erratic Direction of Airflow From Outlets
- Pinpoint Test L: Insufficient, Erratic or No Heat
- Pinpoint Test M: The Air Conditioning (A/C) is Inoperative
- Pinpoint Test N: The Air Conditioning (A/C) is Always On - A/C Compressor Does Not Cycle
- Pinpoint Test O: The Air Conditioning (A/C) is Always On - A/C Mode Always Commanded ON
- Pinpoint Test P: Temperature Control is Inoperative/Does Not Operate Correctly
- Pinpoint Test Q: The Blower Motor is Inoperative
- Pinpoint Test R: The Blower Motor Does Not Operate Correctly
- Pinpoint Test S: Incorrect/Erratic Function in AUTO Mode
- Component Tests
- Climate Control System
- General Procedures
- Heater Hose Coupling
- Air Conditioning (A/C) Clutch Air Gap Adjustment
- Electronic Leak Detection
- Fluorescent Dye Leak Detection
- Air Conditioning (A/C) System Flushing
- Air Conditioning (A/C) System Recovery, Evacuation and Charging
- Notes
- Refrigerant System Recovery
- Refrigerant System Evacuation Using a R-134a Refrigerant Management Machine
- Refrigerant System Evacuation Using a R-134a Manifold Gauge Set and Vacuum Pump
- Refrigerant System Charging Using a R-134a Refrigerant Management Machine
- Refrigerant System Charging Using a R-134a Manifold Gauge Set and Automatic Refrigerant Charging Meter
- Refrigerant System Filtering Following Air Conditioning (A/C) Compressor Installation
- Refrigerant Oil Adding
- Refrigerant Identification Testing
- Air Conditioning (A/C) Odor Treatment