LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls -- (Except Hybrid) >> Removal And Installation >> Selector Lever Cable >> Installation

Selector Lever Cable: Installation

  1. G08634150
  2. G08634148
  3. Torque:  80 lb.in (9 Nm)
    G08634147
  4. Torque:  80 lb.in (9 Nm)
    G08634146
  5. On both sides
    G08634145
  6. G08634117
  7. Torque:  62 lb.in (7 Nm)
    G08634116
  8. G08634128
  9. Install the floor console.

    Refer to: FLOOR CONSOLE .

  10. G08064463
  11. G08636953
  12. If equipped.
    G08632016
  13. G08408341
  14. G08634094
  15. Torque:  62 lb.in (7 Nm)
    G08633710
    1. Rotate the manual control lever clockwise until it stops.
    2. Rotate the manual control lever counterclockwise 1 detent.
      G08634096
    1. Move the slide to the left.
    2. While holding the slide, position the adjuster lock upward.
      G08408575
  16. G08634098
  17. G08634099
  18. 1.5L EcoBoost Refer to: AIR CLEANER .

    1.6L EcoBoost Refer to: AIR CLEANER .

    2.0L EcoBoost Refer to: AIR CLEANER .

    2.5L Duratec Refer to: AIR CLEANER .

  19. Verify that the vehicle starts in P  and N  only and that the reverse lamps illuminate in R  .