LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Focus Titanium, 4D Hatchback, Standard Trans, Gas >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System - 2.0L DURATEC >> Removal And Installation >> Ignition Coil-On-Plug >> Installation

Ignition Coil-On-Plug: Installation

  1. NOTE: Visual check. Inspect the ignition coil-on-plug rubber boot assembly for cracks, rips, or tears. Replace any damaged ignition coil-on-plug rubber boots.

    To install, slide the new ignition coil-on-plug boot onto the ignition coil until it is fully seated at the top of the ignition coil-on-plug.

    G08063943
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals