IAT2 Sensor

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Tighten the IAT2 sensor in 2 stages. During stage 2, do not tighten the IAT2 sensor more than one full turn and do not rotate the IAT2 sensor counterclockwise after tightening.

Stage 1: Tighten the IAT2 sensor to 15 Nm (133 lb-in).
Stage 2: Tighten the IAT2 sensor until it is aligned as shown in illustration.

Fig 1: Identifying IAT2 Sensor And Electrical Connector
Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	-	IAT2 sensor electrical connector
2	12A697	IAT2 sensor