Body Control Module (BCM) and Instrument Panel Cluster (IPC)
NOTE:
The Body Control Module (BCM) and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect both modules. On the scan tool, first select Module Programming < Programmable Parameters < Car Configuration Parameter(s) < Vehicle Configuration < Retrieve the Vehicle Configuration Data. Next select Module Programming < Programmable Parameters < Car Configuration Parameter(s) < Vehicle Configuration < Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.
| Module Name | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Car Configuration Parameters |
|---|---|---|---|---|
| BCM | Yes (through Car Configuration Parameters. Refer to BCM in MULTIFUNCTION ELECTRONIC MODULES .) | Yes | No |
NOTE:
Do not change car configuration parameters except those listed below.
|
| IPC | Yes | Yes | No |