LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Focus ST >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules -- (Except Electric) >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> PINPOINT TEST L: DTC U1000:00 - Body Control Module (BCM) >> Pinpoint Test L: DTC (Diagnostic Trouble Code) U1000:00 - Body Control Module (BCM)

Pinpoint Test L: DTC (Diagnostic Trouble Code) U1000:00 - Body Control Module (BCM)

  1. L1 REVIEW THE DIAGNOSTIC TROUBLE CODES (DTCS) 
    • Review the Diagnostic Trouble Codes (DTCs) from the BCM  self-test.

    Are any other Diagnostic Trouble Codes (DTCs) present besides U1000:00? 

    1. Yes  : CORRECT the Diagnostic Trouble Codes (DTCs). REFER to the BCM DTC CHART  in this service information.
    2. No  : GO to L2 
  2. L2 REPEAT THE BODY CONTROL MODULE (BCM) SELF-TEST 
    • Ignition ON.
    • Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
    • Wait 10 seconds.
    • Repeat the BCM  self-test.

    Is DTC U1000:00 still present? 

    1. Yes  : INSTALL a new BCM  .

      REFER to: BODY CONTROL MODULE (BCM) .

    2. No  : The system is operating correctly at this time. The circuit short has been repaired.
scientia non olet · About LEMON Manuals