LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Escape S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System (Pats) (Without Keyless Entry And Push Button Start) >> General Procedures >> Key Programming Using Diagnostic Equipment >> Programming

Key Programming Using Diagnostic Equipment: Programming

NOTE: If 8 keys are already programmed, this procedure does not allow any more PATS  keys to be programmed without erasing all stored key codes first.
  1. Insert the unprogrammed PATS  key into the ignition lock cylinder and turn the ignition lock cylinder to RUN.
  2. From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS  Functions and follow the on-screen instructions to enter the PATS  security access.
  3. From the diagnostic scan tool menu select "Program additional ignition key" and follow the on-screen instructions.
  4. The engine should now start with the new PATS  key.
scientia non olet · About LEMON Manuals