Lower Arm Bushing: Installation

WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

1.

NOTE: The Drive Pinion Bearing Cone Remover is used to clamp and hold the lower arm while installing the bushing.

Install the Drive Pinion Bearing Cone Remover onto the lower arm.

GFD86759

Courtesy of FORD MOTOR COMPANY

2.

Transfer the index mark to the new lower arm bushing.

3.

NOTE: The Drive Pinion Bearing Cone Remover is used to clamp and hold the lower arm while installing the bushing.

Align the index marks and using the Drive Pinion Bearing Cone Remover, a suitable press and adapters, install a new lower arm bushing.

GFD86760

Courtesy of FORD MOTOR COMPANY

4.

Install the lower arm. For additional information, refer to Lower Arm .