LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle External Controls - 6F35 (Except Hybrid) >> Removal and Installation >> Selector Lever Assembly >> Installation

Selector Lever Assembly: Installation

  1. Torque  : 9 Nm
    G08634121
  2. G08634120
  3. On both sides.

    Torque  : 8 Nm

    G08634124
  4. On both sides.
    G08634118
  5. G08634117
  6. Torque  : 7 Nm
    G08634116
  7. G08634128
  8. Torque  : 4 Nm
    G08634114
  9. G08634113
  10. G08634112
  11. G08634111
  12. G08633904
  13. G08633903
  14. On both sides.
    G08633902
  15. G08634136
  16. Release the parking brake.
    G08634100
  17. NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB  system is deactivated and a DTC  is stored in the ABS  module. Perform the following step to restore the EPB  system and clear the ABS  module DTC  .

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.

  18. Adjust the selector lever cable when a new selector lever is installed.

    Refer to: SELECTOR LEVER CABLE ADJUSTMENT  .

scientia non olet · About LEMON Manuals