BCM DTC Table
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B115E:01 | Camera Module: General Electrical Failure | GO to PINPOINT TEST V |
| B115E:02 | Camera Module: General Signal Failure | GO to PINPOINT TEST V |
| B115E:08 | Camera Module: Bus Signal/Message Failure | GO to PINPOINT TEST V |
| B115E:49 | Camera Module: Internal Electronic Failure | Sets in continuous memory and on-demand in the BCM
when an internal fault in the rear video camera is detected. CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC
B115E:49 returns, INSTALL a new rear video camera. REFER to: PARKING AID CAMERA - VEHICLES WITH: 4-DOOR . |
| B115E:55 | Camera Module: Not Configured | Sets in continuous memory and on-demand in the BCM when the video camera is not configured. Using a diagnostic scan tool, PERFORM the rear video camera configuration. |
| B115E:9A | Camera Module: Component or System Operating Conditions | Sets as an on-demand DTC in the BCM when the prerequisite conditions are not met for the on-demand self test. INSPECT the decklid to make sure it is fully closed and DIAGNOSE any other Diagnostic Trouble Codes (DTCs) present in the BCM . |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: BODY CONTROL MODULE (BCM) . |