LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Manual Transaxle System) >> Vehicle Speed Sensor >> Repair procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. IG KEY "OFF", ENGINE "OFF".
  2. Disconnect the vehicle speed sensor (VSS) connector.
  3. Disconnect the VSS and Driven gear assy'.
  4. Check rotating state of VSS driven gear.
  5. Connect VSS connector and IG KEY "ON".
  6. Rotate Driven gear with hand.

    Specification:  Vehicle Speed Signal generates.