LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Column Electrical Components (Except Hybrid) >> Description and Operation >> Steering Wheel and Column Electrical Components - System Operation and Component Description >> Component Description >> BCM - Push Button Start

BCM - Push Button Start

The BCM  determines the vehicle ignition mode based on the ignition switch input, the stoplamp switch input and RTM  messages. The BCM  communicates the ignition mode to the other modules over the CAN  . The BCM  monitors the ignition switch input and the ignition mode outputs. If a fault is detected in the ignition system, Diagnostic Trouble Codes (DTCs) are set in the BCM  .

Refer to: MODULE CONTROLLED FUNCTIONS - COMPONENT LOCATION (419-10 Multifunction Electronic Modules, Description and Operation).

scientia non olet · About LEMON Manuals