Removal And Installation
WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Remove the 4 screws and the rear armrest.
- 2.
Remove the refrigerator opening trim panel.
- Remove the 2 upper and 8 side screws.
- 3.
Remove the 6 screws and the rear cup holder.
- Disconnect the electrical connectors.
- 4.
Press the 3 refrigerator switch bezel retaining tabs inward and remove the refrigerator switch and bezel from the rear cup holder.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Remove the refrigerator switch from the refrigerator switch bezel.
- Separate the 4 refrigerator switch retaining tabs from the refrigerator switch bezel.
- 6.
To install, reverse the removal procedure.
- To install, make sure to align the guide pins to the guide pin holes.