LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus ST >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine System - General Information -- (Except Electric)) >> General Procedures >> Cylinder Bore Taper >> Check

Cylinder Bore Taper: Check

WARNING: This page is about a different car, the 2014 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate service information for the specification.
  1. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. If the cylinder bore taper does not meet specification, bore the cylinder to the next oversize limit.
    G08062261
scientia non olet · About LEMON Manuals