LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus ST >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L ECOBOOST >> Disassembly and Assembly of Subassemblies >> Piston >> Assembly

Disassembly and Assembly of Subassemblies: Piston: Assembly

  1. NOTE: Align the piston-to-connecting rod orientation marks made during disassembly.
    Fig 1: Aligning Piston-To-Connecting Rod Orientation Marks
    G08063412Courtesy of FORD MOTOR CO.
  2. Apply the specified lubricant to the specified component.

    Material  : Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil / XO-5W30-QSP (WSS-M2C946-A)

    Fig 2: Lubricating Piston Pin And Pin Bore With Clean Engine Oil
    G08063413Courtesy of FORD MOTOR CO.
  3. Fig 3: Locating Piston Pin Retainers In Piston
    G08063414Courtesy of FORD MOTOR CO.
  4. Apply the specified lubricant to the specified component.

    Material  : Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil / XO-5W30-QSP (WSS-M2C946-A)

    Fig 4: Lubricating Piston And Piston Rings With Clean Engine Oil
    G08063415Courtesy of FORD MOTOR CO.
  5. NOTE: Align the piston rings on the piston.
    1. Upper oil control segment ring gap location.
    2. Oil control spacer gap location.
    3. Lower oil control segment ring gap location.
    Fig 5: Identifying Piston Ring Gap Locations
    G08063416Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals